A meeting table should fit the meeting, not just the room. Six people talking over coffee need less surface space than six people working with laptops, printed plans and a speakerphone. The chair size and table base matter too.
If you are choosing a meeting table for a small NZ office, start with the number of regular users, then check the space around them. This guide covers practical starting sizes for four, six and eight people, along with the measurements to confirm before ordering.
Allow room for people, not just chairs
As a planning starting point, allow about 600 to 800mm of table edge per person. The lower end may suit short meetings with compact chairs. More space is helpful for larger chairs, laptops and longer sessions.
This allowance is not a seating guarantee. Legs, bracing, power modules and rounded ends can reduce usable positions. Ask for a drawing of the base as well as the top, and check where people's knees and feet will go.
Count the usual meeting size separately from occasional visitors. A room that comfortably supports six every day is often more useful than one permanently crowded with eight chairs for a meeting that happens once a month.
Four people: consider a round table
A round top around 1100 to 1200mm in diameter is a useful starting point for four people. Everyone can face each other without a formal head of the table. It can work well for short client conversations and small-team catch-ups.
Check the diameter against the chairs and the equipment. Four laptops around a round table need a more generous test than four cups of coffee. A pedestal-style base can make chair positioning easier, but confirm the actual foot and knee clearance.
For an example to compare, the Eiffel Round Meeting Table includes a 1200mm option. Check the selected size and finish rather than judging the dimensions from the photograph.
Six people: start around 1800 × 900mm
A rectangular table around 1800 × 900mm can be a sensible starting point for six, often with two people on each long side and one at each end. Whether that arrangement feels comfortable depends on the chairs, the base and how the room is used.
If people need large laptops, notebooks and space to work together, test a larger top rather than treating six seats as a fixed specification. A seat count on a listing tells only part of the story.
The Novah Meeting Table offers a concrete size comparison: the white-top, white-frame 1600 × 800mm option is $520 ex-GST, while the 1800 × 900mm option is $565 ex-GST. Prices were checked in November 2026. The larger option adds $45 ex-GST, but confirm the chair arrangement and current configuration before ordering.
Eight people: test 2400 × 1200mm carefully
A 2400 × 1200mm rectangular top is a common starting point for eight people, usually with three along each long side and one at either end. This may suit a mixed pattern of short discussions and laptop work.
For all-day meetings, wider chairs or a room used for presentations, you may need a more generous table or fewer seats. End seats can also have a poor view of a wall-mounted screen. Sketch where each person will sit and what they need to see.
Do not squeeze an eight-person table into a six-person room because it technically clears the walls. The room must still work when everyone is seated and someone needs to enter or leave.
Measure the room with the chairs in use
For an initial furniture sketch, test roughly 1000mm between the table edge and surrounding walls. Add more where people need to pass behind occupied chairs, where doors open or where turning space is required. These are planning checks, not NZ accessibility or fire-egress requirements.
For example, adding 1000mm around a 1800 × 900mm table produces a 3800 × 2900mm planning rectangle. A 2400 × 1200mm table produces 4400 × 3200mm. Neither calculation includes every door, cabinet, screen or access need.
Mark the proposed top on the floor. Put actual chairs around it and run a short mock meeting. Have someone walk behind occupied chairs and open the room door. Ask a qualified adviser to confirm accessibility and egress where needed.
Choose chairs before signing off the table
A broad chair with fixed arms takes more room than a compact side chair. Check overall width, not just seat width, and make sure arms can clear the underside of the table if you want chairs to tuck in.
Consider how long people sit and whether the chairs will be moved to other rooms. Compare suitable options in our chairs and seating collection, then test the complete combination rather than buying the table and hoping the chairs fit later.
Plan the screen, power and base together
For video meetings, identify the camera and display positions before placing the table. Check that everyone can be seen and that participants are not sitting with a bright window behind them.
If laptops need power, decide how leads will reach the table without creating a trip hazard. Confirm whether cable ports or power modules are included, optional or unsuitable for the chosen top. Have fixed electrical work handled by a qualified electrician.
Look underneath too. An attractive base can still put a support exactly where an end-seated person's feet need to go. Ask for the usable clearance and the spacing between supports.
Do not leave delivery access until last
Measure doorways, lifts and tight turns along the delivery route. Ask whether the top arrives in one piece and whether the base is assembled on site. A table that fits the finished room may still be difficult to get there.
Confirm delivery level, assembly, placement and packaging removal in the quote. For a larger table, also check who will be available to receive it and whether the building has loading or delivery-time restrictions.
Frequently asked questions
Can a 1800mm table seat eight people?
It might physically hold eight compact chairs, but that does not make it a comfortable eight-person working table. Check usable edge space, leg positions and equipment before accepting the seat count.
Is round or rectangular better for a small room?
Round tables encourage conversation and can suit four people. Rectangular tops often use a narrow room more efficiently and may work better with a presentation screen. Measure both layouts with chairs in place.
Do these sizes meet NZ access requirements?
Not automatically. They are furniture-planning starting points. The full room layout, building use and access needs must be checked separately by an appropriate professional.
Find a table that fits the whole room
Browse our meeting and boardroom tables, or ask Focus for help comparing sizes. Include the room dimensions, chair count and meeting style so the recommendation starts with how you will use it.
Designed and Developed Website