Rylee visitor chair with a black mesh back and cantilever base

Visitor and Meeting Chairs for NZ Offices

Most New Zealand offices buy task chairs with care, then fill the meeting room and reception with whatever is left over. Those rooms are used differently. People sit for a shorter time, they often arrive in groups, and the chairs may be moved, stacked or left in a waiting area all day.

This guide is about visitor, meeting and conference chairs. For the chair someone will sit in at a desk for hours, use our ergonomic office chair guide. The two decisions should not be treated as the same purchase.

Match the chair to the length of the sitting

A reception wait of ten minutes asks less of a chair than a two-hour board meeting. For short waits, a well-made visitor chair with a stable base and a decent seat is usually enough. For longer meetings, look for better cushioning, a supportive back and a chair that still feels comfortable when someone shifts their weight.

The Rylee visitor chair and the Ayron meeting chair are examples of seating meant for those shorter or mid-length sits. A conference chair such as the Swift or the Jump suits rooms where chairs need to be light, consistent and easy to put away.

Decide whether the chairs have to move or stack

Cantilever and four-leg visitor chairs stay where you put them, which is useful in a reception or around a meeting table that rarely changes. If the same room is used for training, a large meeting and then a clear floor, stackable conference chairs and a simple trolley will save time and storage space. The Jump visitor chair is designed to stack. A heavier banquet or conference chair can still be the right choice when the room is set once and left that way.

Check the floor as well. Hard floors and carpet need different glides or feet. A chair that looks right in a showroom can scuff a timber floor, or feel awkward to pull in on a thick carpet.

Keep meeting chairs in a family with the table

Arms must fit under the table, and the seat height should let people sit close enough to work. If you already have a table, measure the underside clearance before you order chairs with arms. If you are buying both, choose them together. Our meeting table size guide will help you settle the table first, then count the seats.

You do not need a task chair mechanism in a meeting room. You do need a chair that can be used by different people across the week, in a fabric or finish that will take frequent use. Browse the chairs and seating collection with that shared use in mind.

Use a different chair in reception if people are waiting, not working

Reception seating can be a visitor chair, a lounge chair or a small sofa, depending on how long people wait. A mesh visitor chair looks tidy and is easy to keep clean. A softer armchair is more welcoming if the wait is longer or the room is meant to feel less formal. See our reception furniture guide for how the chairs sit with a counter and a table.

Avoid putting a worn desk chair in the waiting area. It signals that visitors come last, even when that was not the intention.

Order a spare, and write the finish down

Meeting and visitor chairs get used by many people, and they sometimes get damaged first. If you can, order a spare or make sure the same finish can be added later. Write the fabric and frame colour into the brief, as you would for desks, using our specification checklist if you are going out to quote.

Common questions

Can we use task chairs in the meeting room?

You can, but they are usually bulkier, more expensive and harder to keep in a consistent line around a table. A meeting or visitor chair is typically the better fit, unless the room is also used as a long-stay workspace.

How many visitor chairs does a small office need?

Enough for the largest usual meeting, plus two in reception if people wait. Count the busy day, not the rare all-staff gathering, and add a couple of stackable chairs if you sometimes run a larger session.

Do meeting chairs need arms?

Arms can make a longer meeting more comfortable, provided they fit under the table. In a tight room, or where chairs must stack, an armless chair is often the more practical choice.

Choose the chair for the room, not for the leftover catalogue page

Look through chairs and seating, or tell us how the room is used and how long people sit. We can help you pick a visitor or meeting chair that suits the space, and leave the task chairs for the desks.

Back to blog